Bike Freehub & Cassette Compatibility Manual

Comments on Bike Freehub Cassette Compatibility Manual

alan 2024/09/29

ola, gostaria de saber qual o hub compativel com a roda vittoria qurano 60 clincher, muito obrigado e onde posso comprar

LightBicycle 2024/09/30

Hi Alan, Most of the standard road hubs (20H/24H) rim brake we can supply, such as DT Swiss, Carbon ti and Bitex. Which one would you like? Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

julien 2022/12/29

Hey I'm currently running an ultegra 6800 11spd groupset with old DT350 hubs. I'd like to upgrade to a 12-speed cassette. Will the hub be compatible? Thanks

LightBicycle 2022/12/29

Hi Julien, Do you like to upgrade from shimano 10S to shimano 11S? Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

David 2022/06/06

Hello, I have a Shimano HG11 Road hub running an Ultegra HG-800 cassette. I want to convert this wheel to accommodate an eThirteen TRS+ 9-46 11-speed cassette on a SRAM Force 1x rear mech. Will I need to convert to a SRAM free hub, and if so, which one? Thank you!

LightBicycle 2022/06/08

Hi David, You would need an SRAM XD or XDR freehub body. Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Chris 2022/02/25

I removed an Ultegra 11-speed cassette and replaced with SRAM 11-speed (Red XG-1190) using the same hub (Shimano HG 11/12 Speed Road Freehub). My problem is that the back of the Ultegra cassette is slightly recessed (negative spacing, so to speak), whereas the SRAM cassette is completely flat. This difference causes the SRAM cassette to be flush with the front so that, when installed on bike, the cassette rubs slightly against the frame. Should I be using a different hub? THANK YOU!

LightBicycle 2022/02/26

Hi Chris, The XG-1190 should compatible with HG freehub without any problem. Here's a similar case as you, you can check it out. I hope it helps. https://www.youtube.com/watch?v=sFm4B3mPV9g Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Roberto 2022/02/15

is a compatible freehub mounted onto SE monster quad 29" bike available?

LightBicycle 2022/02/18

Hi Roberto, Thanks for reaching out! There's no freehub on your 29er bike. Monster Quad bike is built with a fixed gear hub judging by the photos and video on their site. What's goal do you want to achieve? Maybe I can help if you can be more specific. Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Steve 2022/01/07

I currently have a Shimano road 11 speed free hub. Can I use a Campagnolo road 12 speed cassette?

LightBicycle 2022/01/08

Hi Steve, SHIMANO and Campagnolo don't share the same interface design. So you cannot use a campy cassette on a SHIMANO freehub body. You have to remove the shimano free hub and install a new campy free hub. Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Jorge 2021/12/28

I was trying to find the new 12 speed cassettes for the R8100 and R9200 in the compatibility chart but I don't think I see them. The Dura-Ace wheels have introduced a new freewheel to reduce weight but the Ultegra apparently use the same freewheel which seems to indicate the HG11 is compatible with the new 12 speed cassettes. You thoughts please? Thanks

LightBicycle 2021/12/28

Hi Jorge, Yes, the new 12-speed is compatible both 11s and 12s cassette. We haven't upgrade the chart yet. Thanks for your kind reminder. Thanks, Lightbicyle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Manu 2021/11/23

Hi, Thanks a lot for your manual ! I have only one question, just to make sure I have correctly undertsood the manual and to avoid any mistakes when ordering. The rear hub of my wheel is a Shimano Deore XT FH-T780 for 8-10 speed cassettes. But I intend to upgrade to 11s MTB drivetrain. Would a shimano MTB 11s cassette (such as SLX M7000) fit on the FH-T780 freehub body ? Thanks in advance.

LightBicycle 2021/11/24

Hi Manu, I am sorry that an 8-10 speed mountain freehub is not compatible with an 11-speed road cassette. You can only upgrade to a 10-speed with a 1mm spacer. Thanks, Lightbicycle

Fabrizio 2021/12/19

Yes with a MTB cassette you can put an 11 speed, but not with a road cassette

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Al 2021/09/01

If I'm using two wheelset but same cassette, one with hg the other hg road, would I need to adjust the Rd each time I swap?

LightBicycle 2021/09/01

Hi Sir, Do you have a spacer on your HG freehub? If so, it would be very easy when you swap from one wheel to another. The cassette will fit just fine. But you will have to check the shifting before riding. Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

P-l 2021/08/01

Hi I want to know wich freehub is compatible with a sram nx eagle 12 speed cassette i want to know which freehub is compatible with a sram nx eagle 12 speed cassette

LightBicycle 2021/08/02

Hello, Thanks for reaching out! SRAM NX 12S cassette is a special one that uses the SHIMANO spined system, which you can use 8/9/10 speed drive body. Here's the SRAM compatible sheet for your ref in case you need it. https://www.sram.com/globalassets/document-hierarchy/compatibility-map/mtb/gen0000000006274-rev-a-2021-e-mtb-components-compatibility-map.pdf Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Ray 2021/07/11

I needed to use my Shimano lock ring with my SRAM NX Eagle 12 speed cassette on my Shimano HG freehub body. The SRAM lock ring was too deep.

Marco 2021/07/13

That is an interesting observation. The bike I bought last year has a Shimano HG spindle with an SRAM 12 NX Eagle cassette. A very light play in the cassette causes some chain skipping. B-screw set correct, cable tension correct, hanger straight. So it should be perfect except for that slight cassette play. I might still have a Shimano lock ring in the “parts box”. I will see if that could solve the issue. I was thinking about a spacer, but we are talking a 0.5mm spacer that would be needed……. Do those even exist?

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Andy 2021/05/11

Can you advise if a Shimano Ultegra 11 speed cassette can be fitted directly on to a SRAM XDR frrehub ?

LightBicycle 2021/05/11

Hi Andy, You can see from the compatible chart that the XDR freehub can only mount with SRAM 11/12 speed road XDR cassette. If you want to use an SRAM XD cassette, you will need a 1.85mm spacer. So, you cannot use a Shimnaon cassette on. Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

mark 2021/04/27

Hi - I have a 10spd Campy Voloce rear deraileur (with campy shifters, around 2013 era) - I have a shimano hub and I've been using a campy/shimano conversion cassette (12 - 28) for many years but its worn out and I cannot readily find a replacement. Do you have any recommendation on what I can use - prefer to replace cassette only and if that is to much I'd like to keep as much of current set up as possible. Easy question - can I use a shimano cassette? All help is appreciated.

LightBicycle 2021/04/27

Hi Mark, I was able to find a compatibility chart for a 10-speed groupset and cassettes. I hope this is helpful. https://cdn-ctstaging.pressidium.com/wp-content/uploads/2020/12/Compatibility-tables.001.png Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

mark 2021/04/13

I have a 11 speed Shimano Ultegra groupset R8000 series, with a 11 speed Shimano HUB, i currently use a Shimano cassette which has a ratio of 11/34. My question - can i swap the existing cassettte and replace with a 11 speed Shimano MTB cassette with a 42/11 ratio. If required i will change the rear derallier for one compatible with the 42/11 MTB cassette. Thankyou Mark Gallacher

LightBicycle 2021/04/13

Hi Mark, You are using an 11 speed Shimano Ultegra groupset R8000 series now, which means your current freehub is Shimano road 11s. You could use a 1.85mm spacer if you want to change the cassette to 11 speed Shimano MTB cassette. Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

Herb 2021/03/13

Hello how r u. I just wanted to know is a rs21 freehub body compatible with a rs10 rear hub i have wore out my freehub body on my rs10 rear wheel i have 11spd

LightBicycle 2021/03/13

Hi Herb, No matter what the hub manufacturer is, the freehub bodies are designed according to groupset companies' standards. We listed three majoir cassette brands on the market, Shimano, SRAM, and Campagnolo. Which 11-speed freehub standard that you have on your wheels? Thanks, Lightbicycle

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

<< Return to Article

1 2

Get in touch

Feel free to leave a comment if you have any questions or suggestions on our products or other issues.

Please leave your name here.

E-mail is required for further contact.

Please enter a message.

We use cookies for a better experience. Learn more.

Customize

Your Cookie Preferences

We use cookies to improve your experience on this website. You may choose which types of cookies to allow and change your preferences at any time. Disabling cookies may impact your experience on this website. You can learn more by viewing our Cookie Policy.

Essential Cookies

Cookies required to enable basic website functionality.
Performance Cookies

Cookies used to understand how the website is being used.
Preference Cookies

Cookies that are used to enhance the functionality of the website.
Advertising Cookies

Cookies used to deliver advertising that is more relevant to your interests.

Aceept All Cookies

Save Preferences

Reject All Cookies

Save Preferences

Reject All Cookies

Accept All Cookies